Avi-on XFAC
Circuit Load Controller
XFAC FEATURES
The Avi-on XFAC is a highly capable wireless zone controller with loads of additional features. 110-277V, 16A Lighting rated relay, high capacity 0-10V dimming, and multiple sensor integration options make this a single component solution for an entire zone based control solution.
Flexible Installation
The XFAC is available in Class I or Class II wiring options. The XFAC is fully networked and integrated with the Avi-on ecosystem and is interoperable with all other Avi-on sensors, wall stations, and fixture controllers.
Sensor Ready
The XFAC is a sensor integration powerhouse with 2 different sensor inputs: Plug any Avi-on Direct Connect sensor for easy sensor integration, or use the general purpose sensor input with 24VDC power and contact input with third party sensors.
Energy Monitoring
The XFAC includes true measured energy consumption readings every 15 minutes (>0.5% accuracy). Use the XFAC to comply with top tier utility rebate programs and corporate energy management initiatives.
UL 924 Rated
The XFAC is rated as an emergency lighting control appliance. Use to control zones or individual fixtures without adding bypass relays. Trigger emergency status for fixtures across an entire building for applications using Uninterruptible Power Supplies (UPS) or based on triggers from Building Control Systems (BCS). Order the -EM version for emergency mode to be pre configured, or enable/disable emergency mode for any XFAC unit with Avi-on Pro.
Color Changing Capable
Available with 2 0-10V outputs to control color changing (CCT) lights.
XFAC Datasheet (PDF)
Class 1
Class 2
220V Class 2
Quick Set-up Guide (PDF)
Commercial Installation Guide (PDF)XFAC
PARTS & ORDERING
| Part Number | Supply Voltage | Channels | Configuration | Relay |
|---|---|---|---|---|
| AVI-B-XFAC-16A-1CH-CL1 | 100 - 277 VAC | Single | Class 1 | 16 Amp |
| AVI-B-XFAC-16A-1CH-CL2 | 100 - 277 VAC | Single | Class 2 | 16 Amp |
| AVI-B-XFAC-16A-CCT-CL1 | 100 - 277 VAC | Dual (CCT) | Class 1 | 16 Amp |
| AVI-B-XFAC-16A-WC-CL1 | 100 - 277 VAC | Dual (WC) | Class 1 | 16 Amp |
| AVI-B-XFAC-16A-CCT-CL2 | 100 - 277 VAC | Dual (CCT) | Class 2 | 16 Amp |
| AVI-B-XFAC-16A-WC-CL2 | 100 - 277 VAC | Dual (WC) | Class 2 | 16 Amp |
| AVI-B-XFAC-16A-ENERGY | XFAC without Control Capability - Energy Monitoring of Circuit only | |||
To order please contact Avi-on sales at (877) AVION-US or prosales@avi-on.com
for order information or integration support.
Specifications
- Supply Voltage US 100-277 VAC
- Supply Voltage EU 220-240 VAC
- Operating Current Consumption (100 VAC / 277 VAC) 20 / 14 81 / 46 mA
- Operating Current Consumption (230 VAC) 14 46 mA
- Output Voltage 0-10V_OUT 0.02 10.35 V
- Storage Temperature -40/-40 +185/+85 °F/°C
- Ambient Operating Temperature -4/-20 +113/+45 °F/°C
- Relay Current (Electronic Ballast/LED Driver) – 16 A
- Amperage for 0-10V lines 325 mA/CH
High Voltage Connection Wires
- AC Voltage (LINE) BLACK (AC LINE) AC 100-277VAC, #14
- NEUTRAL WHITE AC neutral/common, #18
- LINE DRIVER RED Relay controlled AC output (switched line), #14
Low Voltage Connection Wires
- 0-10V_OUT[1]+ PURPLE User controllable 0-10VDC (dimming), #18
- 0-10V_OUT[2]+ ORANGE User controllable 0-10VDC (CCT), #18
- 0-10V_OUT[1&2]- PINK Common dimming negative, #18
- DC + 24V 62mA* Terminal 24 Volt DC output, #16-#24, Max 62mA
- GND – Terminal Common ground, #16-#24
- CC_IN Terminal 24 Volt Sensor input, #16-#24
Case Dimensions
Length 3.58” (91mm), Width 3.58” (91mm), Height 1.57” (40mm)
Protection/Immunity (non-regulatory): AC-input/user input and output connections: ESD Level-4 immunity per IEC/EN 61000-4-2
AC-input: EFT and BUSRTS immunity IEC/EN 61000-4-4, Class3 or better (=<2kV)
AC-input: SURGE immunity IEC/EN 61000-4-5, Class3 or better (=<2kV)
EU Regulatory
Over-voltage: Category III
Signal Indicator: LED ON Represents LOAD OFF
Glow-wire temperatures: 650°C /850°C
PCB Coating Type: Type 2
Certifications
FCC:
- FCC ID: 2AFZI-AVIBG21
IC:
- IC ID: 20544-AVIBG21
BQB:
- DID: D063032
CE:
- EN IEC 6100-6-1:2019,
- EN IEC 6100-6-3:2021
UL File E519564:
- XACN/7 – Miscellaneous Controls, Automatic Electrical Controls
- UL 2043 (Plenum Rated)
- FTBR/7 – UL 924 Emergency Lighting Equipment
Avi-on
featured products
The Avi-on family of products consists of load controllers, sensors, wall stations and connectivity products that work together in one big happy family. Load controllers manage dimming, schedules, scenes, groups/zones and more while the sensors are able to detect motion with all new state-of-the-art features. These products work seamlessly with the Av-ion cloud to provide a robust wireless ecosystem.