The Avi-on
LTE/Ethernet Bridge

Avi-on LTE Remote Bridge
LTE Ethernet Bridge

Bridge FEATURES

The Avi-on LTE/Ethernet Remote Access Bridge (RAB) provides secure 24/7 access to Avi-on Bluetooth Lighting Control Systems enabling remote commissioning, visibility to current device status, and capture of energy monitoring data (requires Avi-on energy monitoring hardware).  Allows connection via Ethernet (RJ-45).

 

Secure Remote Access Regardless of Local Network Access

Remotely monitor, commission, and support any Avi-on network with a single device per network, even if a local internet is not yet installed or is not accessible.  LTE connectivity is enabled by default to provide continuous remote access regardless of the local internet status.  Remotely configure Ethernet IP addresses and configurations as well.

Supports the Full Avi-on Command Set

All network configuration and management features are accessible remotely including device adding/removing from the account, remote device commissioning, diagnostics, remote control, and energy/sensor trigger data collection.

Flexible Remote Management

LTE/Ethernet RAB has full remote status management including cell strength, ethernet status, and RAB status.  LTE provides automatic back up to the Ethernet port to assure high reliability and automatic failover.  

Long Term Remote Support Included

Cellular service is included at no charge during commissioning phase.  Long term backup cellular connectivity also included at no cost.  Primary cellular long term service available at a nominal cost available in 1 and 5 year subscriptions

Avi-on LTE Remote Bridge Avi-on LTE Remote Bridge

Avi-on Direct Connect Sensors  LTE Bridge Datasheet (PDF)
LTE-Ethernet Bridge
LTE Bridge Quick Setup  LTE Bridge Quick Setup

LTE Bridge Setup Guide  LTE Bridge Setup Guide

LTE Bridge Placement Guide  LTE Bridge Placement Guide


Avi-on Direct Connect Sensors  Quick Set-up Guide (PDF)


Commercial Installation Guide  Commercial Installation Guide (PDF)

Bridge
PARTS & ORDERING

Select a part number from the table listed below
Part NumberProduct NameConnection TypeSupply Voltage
AVI-RAB-LTELTE/Ethernet BridgeLTE/Ethernet RJ-4512VDC (AC 110-277 Supply Included)

To order please contact Avi-on sales at (877) AVION-US or prosales@avi-on.com
for information on becoming an Avi-on partner and order details.

Specifications

  • Supply Voltage (AC Power Supply): 110-240VAC.  50/60HZ
  • Device Input (DC): 12-48 VDC
  • Power Consumption: 200-500 mA
  • Ambient Operating Temperature: -4°F to 158°F (-20°C to 70°C)
  • Storage Temperature: -40°F to 185°F (-40°C to 85°C)
  • Ethernet RJ-15: 10-100 Mbps
  • Bluetooth Signal Frequency: 2402-2480 MHz
  • Bluetooth Wireless Range*: 120* Feet
  • LTE Signal (M2M LTE CAT1): Varies based on location
  • LTE Wireless Range: Tower and Location Dependent, requires 2 bars of signal for reliable operation⌃
  • Dimensions: Length 5.00“ (127 mm), Width 4.25“ (108 mm), Height 1.37“ (35 mm)
  • Certifications: FCC/ROHS/CE
  • LTE: CE, FCC, PTCRB, Verizon Wireless, AT&T
  • BLE: FCC, IC, BQB
* Male-Female USB Extension Cable allows extending the Bluetooth radio up to 100ft from the base unit
⌃ Male-Female SMA Extension cable allows extending the LTE antenna up to 100F from the base unit

Avi-on
featured products

The Avi-on family of products consists of load controllers, sensors, wall stations and connectivity products that work together in one big happy family.  Load controllers manage dimming, schedules, scenes, groups/zones and more while the sensors are able to detect motion with all new state-of-the-art features. These products work seamlessly with the Av-ion cloud to provide a robust wireless ecosystem.